MP4 Users - View Single Post

marcelo1251 · 02-05-2007

I fixed it!!!

Thanks Jerome but I couldn't even see the loading screen... just a white screen.

Ok, here's what i did:

1- Place the lower switch to right (when you have it at right you cannot turn on your player).
2- Connect the USB cable to C260 player.
3- When player turns itself on, press and hold both ON/OFF button (upper one) and Menu Button (M) for about 5 seconds.
4- Open CustomerUpdate app (crappy app btw) and load the firmware. I used the one that comes in the 'NO CI' folder to fix it. I remember that my player died when upgraded with the one that's located at 'CI' folder.
5- Click on Update, (i thought it was not going to work but it does!), let it finish (i let it there for 5 minutes) and then click on exit.
6- Disconnect player from USB cable, it turns OFF automatically.
7- Place the lower switch to left (when you have it at right you cannot turn on your player).
8- Turn it ON and let it go!!

02-05-2007	#7 (permalink)
marcelo1251 Is that a file format? Join Date: Nov 2006 Posts: 24	I fixed it!!! Thanks Jerome but I couldn't even see the loading screen... just a white screen. Ok, here's what i did: 1- Place the lower switch to right (when you have it at right you cannot turn on your player). 2- Connect the USB cable to C260 player. 3- When player turns itself on, press and hold both ON/OFF button (upper one) and Menu Button (M) for about 5 seconds. 4- Open CustomerUpdate app (crappy app btw) and load the firmware. I used the one that comes in the 'NO CI' folder to fix it. I remember that my player died when upgraded with the one that's located at 'CI' folder. 5- Click on Update, (i thought it was not going to work but it does!), let it finish (i let it there for 5 minutes) and then click on exit. 6- Disconnect player from USB cable, it turns OFF automatically. 7- Place the lower switch to left (when you have it at right you cannot turn on your player). 8- Turn it ON and let it go!! Last edited by marcelo1251 : 02-05-2007 at 02:23 AM.